High-pressure pumps PTJ / PTM
Air-driven hydraulic pressure intensifiers for water, oil and emulsions – up to 2660 bar at 7 bar air pressure.
High pressure from compressed air
The high-pressure pumps are used wherever compressed air is available as an energy source and high or very high hydraulic pressure is required for testing purposes or other hydraulic applications.
ATEX as standard
ATEX II 2 GD T5 (100 °C) – for use in potentially explosive atmospheres.
For many media
Designed for pure water, oil, emulsion or other liquids.
Stops at test pressure
Zero flow with the outlet closed – without air consumption – and automatic restart.
Maintenance-free
Pump and valves in stainless steel 1.4401 / 1.4571 – long service life, compact and quiet.
PTJ – up to 1095 bar
The air-driven hydraulic pressure intensifiers of the PTJ series are designed to deliver liquids at pressures up to 1095 bar with an air pressure of 7 bar. Since 2015 with a blue anodised valve head.
- 9 versions for outlet pressures from 14 to 1095 bar
- Flow rate from 14.0 l/min (ratio 4.4:1) to 0.4 l/min (165:1)
- Minimum air pressure at the start of delivery 1.3 bar, depending on the ratio
- Compressed air supply max. 8 bar; flow rate and outlet pressure infinitely adjustable via the air
- Self-priming (except PTJ1095); dry running should be avoided
- Seals silicone rubber, other materials optional
| Type | Ratio | Outlet max. bar | Outlet min. bar | cm³ / stroke | l/min max. | Inlet | Outlet |
|---|---|---|---|---|---|---|---|
| PTJ14A | 2.2:1 | 14 | 3.0 | 48 | 10.0 | G 1/2" | G 1/2" |
| PTJ29A | 4.4:1 | 29 | 5.5 | 48 | 14.0 | G 1/2" | G 1/2" |
| PTJ73A | 11:1 | 73 | 14.0 | 19 | 5.0 | G 1/2" | G 1/2" |
| PTJ126A | 19:1 | 126 | 26.0 | 10 | 3.2 | G 1/2" | G 1/2" |
| PTJ185A | 28:1 | 185 | 35.0 | 7.5 | 2.4 | G 1/2" | G 1/2" |
| PTJ290A | 45:1 | 290 | 54.0 | 4.5 | 1.4 | G 1/2" | G 1/2" |
| PTJ465A | 70:1 | 465 | 87.0 | 3.0 | 0.9 | G 1/2" | G 1/2" |
| PTJ665A | 100:1 | 665 | 124.0 | 2.1 | 0.6 | G 1/2" | G 1/2" |
| PTJ1095A | 165:1 | 1095 | 204.0 | 1.3 | 0.4 | G 1/2" | G 1/2" |
Air inlet pressure 7 bar. Air consumption all PTJ 0.5 m³/min, lubricated air. Max. l/min unpressurised.
PTM – up to 2660 bar
The PTM series delivers liquids at pressures up to 2660 bar with an air pressure of 7 bar – and offers high flow rates of up to 37 l/min at low ratios.
- 12 models for outlet pressures from 29 to 2660 bar
- Flow rate from 37 l/min (4.4:1) to 0.58 l/min (400:1)
- Pneumatic silencers as standard
- Minimum air pressure at the start of delivery 1.4 bar
- Self-priming (except PTM1700A and PTM2660A)
- Also available as a portable unit and as a special version with data logger
| Type | Ratio | Outlet max. bar | Litres / stroke | l/min max. | Inlet | Outlet |
|---|---|---|---|---|---|---|
| PTM29A | 4.4:1 | 29 | 0.195 | 37 | G 1" | G 3/4" |
| PTM65A | 9.9:1 | 65 | 0.086 | 23 | G 1" | G 3/4" |
| PTM90A | 13.8:1 | 90 | 0.062 | 15 | G 1" | G 3/4" |
| PTM115A | 17.6:1 | 115 | 0.048 | 11 | G 3/4" | G 1/2" |
| PTM185A | 28.0:1 | 185 | 0.030 | 7.3 | G 3/4" | G 1/2" |
| PTM250A | 38.0:1 | 250 | 0.022 | 5.8 | G 3/4" | G 1/2" |
| PTM350A | 53.0:1 | 350 | 0.016 | 3.8 | G 1/2" | G 1/2" |
| PTM525A | 79.0:1 | 525 | 0.010 | 2.8 | G 1/2" | G 1/2" |
| PTM755A | 114:1 | 755 | 0.007 | 1.8 | G 1/2" | G 1/2" |
| PTM1055A | 159:1 | 1055 | 0.005 | 1.5 | G 1/2" | G 1/2" |
| PTM1700A | 256:1 | 1700 | 0.003 | 0.84 | G 1/2" | 3/4" HD |
| PTM2660A | 400:1 | 2660 | 0.002 | 0.58 | G 1/2" | 3/4" HD |
Air inlet pressure 7 bar. Max. l/min unpressurised.
PTJR / PTMR – wide pressure range
Special version of the PTJ or PTM pump with separately adjustable air inlets for the drive piston and the changeover valve. Advantage: a much larger difference between minimum and maximum hydraulic outlet pressure.
- PTJR / PTMR: pump with separate air connections (each 1/4" BSPP), pressure at the changeover valve at least 2.5 bar
- PTAJR / PTAMR: pump with two separate pressure regulators, fully assembled
- Minimum air pressure at the drive piston 0.4 bar
- All other technical data as for the standard version
| PTJR | max. bar | min. bar PTJR | min. bar PTJ |
|---|---|---|---|
| PTJR29A | 29 | 1.7 | 5.5 |
| PTJR73A | 73 | 4.3 | 14.0 |
| PTJR126A | 126 | 7.5 | 26.0 |
| PTJR185A | 185 | 11.0 | 35.0 |
| PTJR290A | 290 | 17.0 | 54.0 |
| PTJR465A | 465 | 27.0 | 87.0 |
| PTJR665A | 665 | 38.0 | 124.0 |
| PTJR1095A | 1095 | 63.0 | 204.0 |
| PTMR | max. bar | min. bar PTMR | min. bar PTM |
|---|---|---|---|
| PTMR29A | 29 | 1.7 | 5.5 |
| PTMR65A | 65 | 4.0 | 13.0 |
| PTMR90A | 90 | 5.5 | 18.0 |
| PTMR115A | 115 | 7.0 | 23.0 |
| PTMR185A | 185 | 11.0 | 37.0 |
| PTMR250A | 250 | 15.0 | 50.0 |
| PTMR350A | 350 | 20.0 | 70.0 |
| PTMR525A | 525 | 30.0 | 105 |
| PTMR755A | 755 | 44.0 | 151 |
| PTMR1055A | 1055 | 62.0 | 211 |
PTMD – double-acting
The double-acting high-pressure pump PTMD delivers on every stroke in both directions, achieving a particularly even, high flow rate – ideal for larger test volumes and as a pressure source for permanently installed systems.
Technical data and versions on request.
Enquire about PTMDPossible applications
Static and burst testing of hoses, pipes and valves. Pressure testing of vessels or hydraulic systems. Power source for installed or mobile systems, for impregnation plants, injection systems, hydraulic presses, bolt cutters, clamping systems and the like. The pumps are designed as easy-to-install units – also for mobile applications. Gas and air boosters on request.
Your pressure test – our test system
Tell us the test pressure, test medium and test specimen – we will configure the right KDDPA system or build your test bench to specification.
Send an enquiry



