
KDDPA test systems
Portable air-driven hydraulic high-pressure test systems in stainless steel – for test and burst pressures up to 2660 bar.
High water pressure – with compressed air only
KDDPA high-pressure test systems are designed for test pressures up to 665 bar with PTJ pumps – and up to 2660 bar with large PTM pumps – at 7 bar air pressure at the pump.
The test systems are used wherever compressed air is available as an energy source and high or very high water pressure is required for precise testing, burst testing or other mobile or stationary applications.
The robust KDDPA systems are always supplied in corrosion-resistant stainless steel and can be used for outdoor pressure testing at any time.
- Precise pressure generation thanks to the standard pneumatic precision pressure regulator
- Self-explanatory operating logic from left (water, compressed air) to right (pressure outlet)
- Robust, compact design, minimal noise
- ATEX-certified pump
- Optionally with tank (4 l plastic tank, 4 l stainless-steel tank or large stainless-steel tank) with return filter and filling valve
- Virtually maintenance-free – only the lubricator needs topping up
- Hydraulics in 1.4401 / 1.4571, housing in 1.4301
- Pump seal material silicone rubber, optionally Viton
- The pump stops when the test pressure is reached and restarts automatically on a slight pressure drop
Available versions
Standard version with PTJ / PTM: minimum test pressure 20 % of nominal pressure. Wide pressure range with PTJR / PTMR: minimum test pressure 5.7 % of nominal pressure.
| without tank | with tank | |||
|---|---|---|---|---|
| Equipment | Standard | wide pressure range | Standard | wide pressure range |
| Small pump PTJ / PTJR | ||||
| Basic version | KDDPA01-PTJ | KDDPA01-PTJR | KDDPA02-PTJ | KDDPA02-PTJR |
| + pressure sensor at the pressure outlet | KDDPA01-1EL-PTJ | KDDPA01-1EL-PTJR | KDDPA02-1EL-PTJ | KDDPA02-1EL-PTJR |
| + proportional precision pressure control valve | KDDPA01-2EL-PTJ | KDDPA01-2EL-PTJR | KDDPA02-2EL-PTJ | KDDPA02-2EL-PTJR |
| Large pump PTM / PTMR | ||||
| Basic version | KDDPA03-PTM | KDDPA03-PTMR | KDDPA04-PTM | KDDPA04-PTMR |
| + pressure sensor at the pressure outlet | KDDPA03-1EL-PTM | KDDPA03-1EL-PTMR | KDDPA04-1EL-PTM | KDDPA04-1EL-PTMR |
| + proportional precision pressure control valve | KDDPA03-2EL-PTM | KDDPA03-2EL-PTMR | KDDPA04-2EL-PTM | KDDPA04-2EL-PTMR |
1EL = pressure sensor 0–10 V or 4–20 mA with digital display. 2EL = additional electronic proportional pressure regulator for fully automatic pressure control. Further versions (e.g. KDDPA05 with 3EL / 4EL, console housing, duo unit) on request.



1EL – with pressure sensor
Pressure sensor at the pressure outlet with digital display and 5 m connecting cable.
Learn more
2EL – fully automatic
Additional electronic proportional precision pressure regulator for automatic pressure control.
Learn moreTechnical data KDDPA with PTJ / PTJR
Pump pneumatic inlet pressure max. 7 bar, hydraulic outlet 1/2" BSP. Values for PTM / PTMR can be found under High-pressure pumps.
Standard version PTJ
| Part number | Ratio | Outlet min. bar | Outlet max. bar | cm³ / stroke | l/min max. (unpressurised) |
|---|---|---|---|---|---|
| KDDPAxx-PTJ14A | 2.2 : 1 | 2.8 | 14 | 48 | 10.0 |
| KDDPAxx-PTJ29A | 4.4 : 1 | 5.5 | 29 | 48 | 14.0 |
| KDDPAxx-PTJ73A | 11 : 1 | 14 | 73 | 19 | 5.0 |
| KDDPAxx-PTJ126A | 19 : 1 | 26 | 126 | 10 | 3.2 |
| KDDPAxx-PTJ185A | 28 : 1 | 35 | 185 | 7.5 | 2.4 |
| KDDPAxx-PTJ290A | 45 : 1 | 54 | 290 | 4.5 | 1.4 |
| KDDPAxx-PTJ465A | 70 : 1 | 87 | 465 | 3.0 | 0.9 |
| KDDPAxx-PTJ665A | 100 : 1 | 124 | 665 | 2.1 | 0.6 |
Wide pressure range PTJR
| Part number | Ratio | Outlet min. bar | Outlet max. bar | cm³ / stroke | l/min max. (unpressurised) |
|---|---|---|---|---|---|
| KDDPAxx-PTJR14A | 2.2 : 1 | 0.8 | 14 | 48 | 10.0 |
| KDDPAxx-PTJR29A | 4.4 : 1 | 1.7 | 29 | 48 | 14.0 |
| KDDPAxx-PTJR73A | 11 : 1 | 4.3 | 73 | 19 | 5.0 |
| KDDPAxx-PTJR126A | 19 : 1 | 7.5 | 126 | 10 | 3.2 |
| KDDPAxx-PTJR185A | 28 : 1 | 11 | 185 | 7.5 | 2.4 |
| KDDPAxx-PTJR290A | 45 : 1 | 17 | 290 | 4.5 | 1.4 |
| KDDPAxx-PTJR465A | 70 : 1 | 27 | 465 | 3.0 | 0.9 |
| KDDPAxx-PTJR665A | 100 : 1 | 38 | 665 | 2.1 | 0.6 |
Ambient temperature −2 to 60 °C. Air consumption (all KDDPAxx-PTJ versions) 0.5 m³/min, lubricated air. Lubricator setting in normal operation max. 0.5 drops/min; oil-free operation possible for short periods. “xx” stands for the housing version (01 – 04).
Standard equipment
The test systems are always delivered ready for use with the following assemblies:
- High-quality, generously sized air service unit for minimal pressure drop, with lubricator and pressure gauge
- Precise pneumatic precision pressure regulator, manual, with pressure gauge
- Ball valve for compressed air
- Water filter 1/2" with 10 µ filter element
- Ready to connect to a “Gardena”-compatible water hose
- Hydraulic side with 100 mm stainless-steel chemical pressure gauge, glycerine-filled
- Sensitive pressure-relief needle valve
- High-pressure valve block in 1.4401 (V4A)
Dimensions
| Housing | L × H × W (approx.) |
|---|---|
| Small housing, PTJ only | 680 × 350 × 280 mm |
| Large housing, PTJR and PTM | 780 × 380 × 300 mm |
| Console housing | application-specific, to drawing |
The flexible KDDPA housing allows countless customised versions and additional options fitted ready-assembled into the system with little effort.
Your pressure test – our test system
Tell us the test pressure, test medium and test specimen – we will configure the right KDDPA system or build your test bench to specification.
Send an enquiry



